Same nomenclature as Rheem (sister brand), UA prefix. Paste your model number for an instant decode.
Always confirm against the data plate's rated capacity line — model ranges occasionally reuse digits for non-capacity codes, and the plate is authoritative.
| Capacity code | BTU/hr | Tons |
|---|---|---|
| 09 | 9,000 | 0.75 |
| 12 | 12,000 | 1.0 |
| 18 | 18,000 | 1.5 |
| 24 | 24,000 | 2.0 |
| 30 | 30,000 | 2.5 |
| 36 | 36,000 | 3.0 |
| 42 | 42,000 | 3.5 |
| 48 | 48,000 | 4.0 |
| 60 | 60,000 | 5.0 |
Amana American Standard Blue Star Bryant Carrier Daikin Goodman Heil Hitachi Lennox LG Lloyd O General Panasonic Payne Rheem Samsung Trane Voltas Whirlpool York
On the data plate — a metal or foil sticker on the side or back of the outdoor unit (or behind the front panel on indoor split units). Use the model number, not the serial number, which encodes the manufacture date rather than capacity.
Same nomenclature as Rheem (sister brand), UA prefix. Divide the BTU code by 12 to get tons.
Paste the model number from the outdoor unit's data plate into the decoder above — it applies Ruud's nomenclature automatically. Example: UA1648AJ1NA = 4.0 tons.
Ruud is Rheem’s sister brand and shares its nomenclature exactly: a two-digit capacity code (multiple of 12,000 BTU/hr) after the family and SEER characters.
Modern Ruud condensers begin with UA (split air conditioner) or UP (heat pump), followed by SEER digits and the capacity at positions 5–6 — so UA1436 reads 36 → 3.0 tons and UP1542 reads 42 → 3.5 tons.
Older models use dash-padded layouts such as UAND-036 or UAPM-024, where the zero-padded three-digit block holds the capacity (024 → 2.0 tons).
The decoder above applies this nomenclature automatically. Capacity codes are nominal — always confirm against the rated-capacity line on the unit’s data plate.
Capacity decoding on this page follows Ruud’s published model-number nomenclature. To confirm a unit’s actual rated capacity and efficiency, cross-check the authoritative references below.
Tonnage is derived from nominal cooling capacity: 1 ton of refrigeration = 12,000 BTU/hr.
Model-number conventions and standards evolve, and manufacturers occasionally reuse digits for non-capacity codes — the rated-capacity line on the unit’s data plate is always authoritative. Figures here are for identification and planning, not a substitute for a professional load calculation.
Different brand? Back to the full 22-brand decoder. Sizing a replacement? Check what your space really needs with the AC tonnage calculator first — the old unit may have been mis-sized.